网站广告图
网站广告图
网站广告图
网站广告图
网站广告图
首页广告图

Application

【 Diesel Oil 】

Diesel oil refers to the blending of distillate oil produced by crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, petroleum coking and other processes; it can also be produced by shale oil processing and coal liquefaction. It is a mixture of light petroleum products and complex hydrocarbons (carbon atom number is about 10-22). It includes light diesel (boiling point range is about 180-370 ℃) and heavy diesel (boiling point range is about 350-500 ℃).


Compared with gasoline, diesel oil has higher energy density and lower fuel consumption rate. Widely used in large vehicles, railway locomotives, ships and power generation.


Marine Diesel Oil is a blend of different middle distillates derived from the crude oil refining process. It is usually composed of light and heavy gas oil, light and heavy cycle oil, as well as vacuum gas oil. The chemical components are alkenes, cyclo alkanes and different carbon hydrides. The boiling range is between 200°C and 500°C.


The international trading names are DMA (Marine Gas Oil /MGO) and DMB (Marine Diesel Oil /MDO). The main differences between these fuels are their viscosities, densities, as well as their sulphur content.

All of SOAR’s liquid fuel engines are capable of burning distillated fuels. Of course, our medium speed dual fuel engines  are capable of burning MFO blended with gas or if gas is not available, in 100% liquid fuel mode.


Diesel Specification
  • Property/feature
  • Unit
  • Properties
  • Test method
  • Density at 15°C,min.
  • kg/m3
  • 820.0
  • ISO 3675
  • Density at 15°C,max.
  • kg/m3
  • 890.0
  • ISO3675
  • Cenimatic viscosity/40°,mix.
  • mm²/s
  • 2
  • ISO 3104
  • Cenimatic viscosity/40°,max.
  • mm²/s
  • 6.0
  • ISO 3104
  • Filterability in summer,max.
  • 0
  • 0
  • DIN EN 116
  • Filterability in winter, max.
  • -12
  • -12
  • DIN EN 116
  • Flash point,max.
  • °C
  • 60
  • ISO 1523
  • Content of sediment,max.
  • % by weight
  • 0.01
  • ISO 3735
  • Water content,max.
  • % by volume
  • 0.05
  • ISO 3733
  • Sulphur content,max.
  • % by weight
  • 1.5
  • ISO 8754
  • Ash,max.
  • % by weight
  • 0.01
  • ISO 6245
  • Coke residue (MCR),max.
  • % by weight
  • 0.10
  • ISO CD 10370
  • Cetane number,min.
  • -
  • 40
  • ISO 5165
  • Copper-strip test,max.
  • -
  • 1
  • ISO 2160
  • Hydrogen sulfide,max.
  • mg/kg
  • 2
  • IP 570
  • Acid number,max.
  • mg KOH/g
  • 0.5
  • ASTM D664
  • Oxidation stability,max.
  • g/m3
  • 25
  • ISO 12205
  • Lubricity,max.
  • µm
  • 520
  • ISO 12156-1
Note:

All data provided on this site is for information purposes only, explicitly non-binding and subject to changes without further notice.

    返回
    Copyright © 2021 Soar Power Group
    +86-769-83523198 +86-769-83523298
    Url: http://www.soarpower.com/ E-mail:sale@soarpower.com
    微信
    联系
    TOP
    wechatCode 微信号